MSN slurry vibrating screen
Introduction material Features Technical Parameter Message inquiryIntroduction
Senyou MSN series slurry vibrating screen for ceramic is one type intermediate frequency sieve,it is based on the original ceramic special sieve, through technical improvement and a lot of experiments.
A new type of screening equipment independently developed. The product is a single-layer grid structure, the upper frame is heightened and open, and the bottom frame is also as a vibrating body, the slag discharge is good and the efficiency is high. The vibration motor adopts a specially designed energy-saving motor with a dial, which is better than the same model ,the energy saving of the screening equipment is about 30%.
material
Functions
1.Size classification: separation of particles into groups of comparable size from the materials.
2.Gravity filtering: removal of solids from liquids and slurry.
3.Product reclamation: removal of the solids from waste product or clarification of waste liquor for further use.
4.Screening: separation of a few oversize particles from a quantity of materials.
5. Liquid cleaning: cleaning of wastewater or removing the solids from recirculating liquid.
Features
1. Single layer mesh design,which can make the fine mesh extend the service life 3-5 times.
2. Reduced the support mesh, increased its capacity by 30%.
3. Lower production cost and less easy-damaged parts.
4. The screen replacement time is shorter,only 3-5 minutes, operate more easier.
Technical Parameter
Model | MSN-1000 | MSN-1200 |
Vibration Mode | Three dimensional vibration | |
Power | 0.75KW | 1.1KW |
Largest Vibration Force | 10000N | 15000N |
Amplitude | 2-4mm | |
Normal Power | 380V/50Hz 415V/50Hz | |
Screen Area | 0.785㎡ | 1.002㎡ |
Decibels | ≤75db | |
Dimension | 1240mm×1240mm×920mm | 1370mm×1370mm×920mm |
- next:
MSG high frequency vibrating screen
2018-01-10





