Repair and maintenance of square swing screen

update time：2026-01-22 Click count：6次

1.Before starting the oscillating screen, it is necessary to check the vibration state of the material on the screen surface and ensure the smooth operation of the material channel.

2.In order to ensure that the swing screen is in good working condition, the screening efficiency and equipment operation status should be checked regularly. Regularly check the feeding mechanism and clean the screen surface to keep the sieve opening rate above 80%; check whether the cleaning rubber ball is worn, and replace it if necessary to keep the screen surface with sufficient self-cleaning ability.

3.Correctly adjust the feeding device of the swing screen, so that the material layer enters the working screen surface uniformly and stably according to the width of the screen surface; avoid the material concentrated in the local position of the screen surface and affect the screening effect.

4.If the oscillating screen is equipped with a dust removal device, the starting sequence is to turn on the relevant fan first, then start the vibration mechanism, and then start the normal operation of the feeding after the equipment runs smoothly.

5.When the swing screen is in use, its main wear part is the screen, so the inspection of the screen is very important, and in the daily maintenance, the screen should be replaced and maintained in time.